MARKING SPRAYS FOR LASERS - PRODUCTS FOR ADDITIVE LASER MARKING - PIGMENTUM GMBH
PERMANENT MARKINGS - THROUGHOUT THE ENTIRE PRODUCT LIFECYCLE
The markSolid laser marking material is applied in a thin layer to the surface and then chemically and physically bonded to the surface in a thermally activated process by the laser. The result: high-contrast markings on metal, glass, and ceramics in various colors, always with significantly reduced heat input into the component.
FOR THE LASERS YOU ALREADY HAVE
markSolid products are the link between the laser and the substrate to be marked. markSolid works for all lasers and gives your device new capabilities.
CO2
10.6 µm
LABEL ALL METALS, e.g. stainless steel faster and more durable than annealing markings with the fiber laser are possible, or create colored markings on glass and ceramic materials.
FIBER LASER
1,064 nm
NOW MARK GLASS AND CERAMICS in contrasting colors, chemically resistant and dishwasher safe. When conventional marking reaches its limits, produce a deep black marking on all metals with extremely high chemical and mechanical resistance.
DIODE LASER
400 nm - 900 nm
With markSolid, your diode laser becomes a superstar. Mark stainless steel and many other metals permanently and with perfect contrast. Glass and ceramic markings also work in color.
markSolid - LASER MARKING MATERIALS ARE
BRILLIANT AND RELIABLE
As an additive laser marking process, markSolid combines excellent contrast, best edge sharpness, and high resolution with maximum resistance to mechanical and chemical stresses as well as to UV light and high temperatures (>1,000°C).
PERMANENT AND COUNTERFEIT-RESISTANT
Often, it is necessary to withstand multiple load components simultaneously (e.g., outdoor or offshore, a combination of UV radiation, seawater, acid rain, snow and ice, or even sandstorms). markSolid laser markings also succeed here.
Since the marking chemically and physically bonds with the component, its removal or alteration is not possible without simultaneously causing significant damage to the component.
MATERIALS GENTLE
Typical for laser markings is the non-contact working method. Furthermore, the markSolid process also reduces the thermal stress on the substrate. Structural changes or warping in metal signs are significantly minimized, with no worries about rust formation when marking stainless steel. There is no material removal, and the marking does not become a predetermined breaking point – important when marking components with high safety relevance.
THE CLEARLY BETTER SOLUTION:
The markSolid process with its laser marking materials.
markSolid markings combine top results in durability, contrast, resolution, and marking speed at a low stress level for the component to be marked.
The additive marking process places only low demands on the marking laser and opens up diverse, new possibilities around the existing laser or the material itself (e.g., metal marking with the CO2 laser or colored markings on glass and ceramics with fiber lasers).
For special requirements, we customize markSolid laser marking materials or develop new solutions.
markSolid - LASER MARKING MATERIALS ARE
BRILLIANT AND RELIABLE
As an additive laser marking process, markSolid combines excellent contrast, best edge sharpness, and high resolution with maximum resistance to mechanical and chemical stresses as well as to UV light and high temperatures (>1,000°C).
PERMANENT AND COUNTERFEIT-RESISTANT
Often, it is necessary to withstand multiple load components simultaneously (e.g., outdoor or offshore, a combination of UV radiation, seawater, acid rain, snow and ice, or even sandstorms). markSolid laser markings also succeed here.
Since the marking chemically and physically bonds with the component, its removal or alteration is not possible without simultaneously causing significant damage to the component.
MATERIALS GENTLE
Typical for laser markings is the non-contact working method. Furthermore, the markSolid process also reduces the thermal stress on the substrate. Structural changes or warping in metal signs are significantly minimized, with no worries about rust formation when marking stainless steel. There is no material removal, and the marking does not become a predetermined breaking point – important when marking components with high safety relevance.
THE CLEARLY BETTER SOLUTION:
The markSolid process with its laser marking materials.
markSolid markings combine top results in durability, contrast, resolution, and marking speed at a low stress level for the component to be marked.
The additive marking process places only low demands on the marking laser and opens up diverse, new possibilities around the existing laser or the material itself (e.g., metal marking with the CO2 laser or colored markings on glass and ceramics with fiber lasers).
For special requirements, we customize markSolid laser marking materials or develop new solutions.
THREE STEPS TO FINISHED MARKING
Apply
Apply marking material thinly and evenly with a spray can, brush, airbrush, or roller. It dries in no time.
Laser
Under the laser, a physical and chemical bond is formed between the laser marking material and the substrate. This bond and the inorganic nature of the laser marking materials create highly durable permanent markings.
Wash off
Remove excess marking material, e.g., with water. The permanent marking remains.
OUR PRODUCTS
For permanent markings on all metals, anodized aluminum, glass, ceramics, and porcelain
select first by material, then by application method and color.
markSolid
markSolid products are developed and manufactured in Germany
Black marking on metals
markSolid 114 – Aerosol spray can
markSolid 015 – for brush and airbrushBlack marking on anodized aluminum
markSolid 904 – for airbrush
Colored marking on glass, ceramics, porcelain
markSolid 501 - white – for airbrush
markSolid 551 - blue – for airbrush
markSolid 560 – green – for airbrush
markSolid 590 – black – for airbrushBlack marking on sapphire (glass)
markSolid 990 – black – for airbrush
Individual solutions
Your application - Your material.
When standard products reach their limits, we develop the appropriate solution. In our product development in Stein near Nuremberg, we specifically tailor markSolid products to your substrate, your laser, and your process, made in Germany with 20 years of experience.
What we customize for you
Substrate
Special alloys, glazed ceramics, specialty glasses, and coated surfaces.
Application
Spray, paste, or airbrush, for manual or automated processes.
Laser parameters
Optimized for your laser type and your cycle time.
Color & Durability
Deep black or colored markings, resistant to UV light, dishwasher, aggressive chemicals, and environmental influences.
Cermark
Proven products from a traditional US brand
Black marking on metals
LMM 6000 aerosol spray can
LMM 6000 liquid/paste – for brush and airbrushBlack marking on anodized aluminum and other surfaces
LMM 6018 transfer tape
markSolid 114
The most powerful metal marking product for stainless steel, all non-ferrous metals, and metallic coatings. Highest durability and high marking speeds even with lower-powered laser devices. Very efficient due to adjustable spray nozzle and simple application. Shake the can briefly, spray, done. Does not clog and no "upside-down spraying after use" needed.
markSolid 015
Paste version of markSolid 114 with identical marking properties.
markSolid 904
Specifically for anodized aluminum. Economical for large demand or larger areas. Requires a one-time training for optimal laser settings and coating (very thin and even).
markSolid 501, 551, 560, 590
Colored products in paste form for glass, ceramics, enamel. Markings are dishwasher safe and resistant under challenging industrial conditions.
Cermark LMM 6000
A US product for many metals. For well-heat-conductive metal surfaces, more powerful lasers are better suited. After application, a grip-resistant coating is created, allowing the stacking of pre-coated signs. Available as an aerosol can and paste product.
Cermark LMM 6018
Transfer tape for all surfaces (metals, glass, ceramics), when spraying is not desired. Especially recommended for anodized aluminum with a short training time. Ideal for occasional needs and small areas.
TELL US MATERIAL AND LASER
Tell us the material, laser type, and your task. You will receive a specific product recommendation.